Bambu Lab P1S 3D Printer
The P1S model, like the P1P printer, is built on a proven CoreXY kinematic system. Its stable structure allows it to reach printing speeds of up to 500 mm/s. The printer features an enclosed, temperature-controlled chamber with an efficient cooling system and a carbon air filter inside. Thanks to these solutions, the P1S can also work with more demanding filaments. Printer calibration is easier than you might think and does not require any special skills. After a short setup, you’ll be ready for your first print in just 15 minutes. The printer’s build volume is 256 × 256 × 256 mm.
Product Features
- Works right out of the box, set up in 15 minutes
- Well-polished hardware and software
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- Up to 20000 mm/s² acceleration, prints a benchy in 18min
- Built-in camera for remote monitoring and timelapse
- The AMS 2 Pro is compatible with X1/P1 series printers for multi-material printing.
Parameters Comparison
| P1P | P1S | |
| Build Volume(WxDxH) | 256 x 256 x 256 mm³* | |
| Shell | Open frame (Printable Modplates Available) | Enclosed (Plastic & Glass) |
| Hot End | All-Metal | |
| Nozzle | 0.4 mm Stainless Steel Included | |
| Max Hot End Temperature | 300 ℃ | |
| Nozzle Diameter |
0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm (Optional) |
|
| Build Plate Surface Compatibility |
Bambu Textured PEI Plate, Bambu Cool Plate, Bambu Engineering Plate, Bambu High Temperature Plate |
|
| Max Build Plate Temperature | 100℃ | |
| Max Speed of Tool Head | 500 mm/s | |
| Max Acceleration of Tool Head | 20 m/s² | |
| Control Board Fan | Optional | Closed Loop Control |
| Chamber Temperature Regulator Fan | Optional | Closed Loop Control |
| Auxiliary Part Cooling Fan | Optional | Closed Loop Control |
| Air Filter | Optional | Activated Carbon Filter |
| Supported Filament |
Ideal: PLA, PETG, TPU, PVA, PET Capable: PA, PC, ABS, ASA |
Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA Capable: PA, PC |
| Chamber Monitoring Camera |
Low Rate Camera 1280 x 720/0.5fps Timelapse Supported |
|
| Filament Run Out Sensor | Yes | |
| Physical Dimensions |
P1P：386 * 389 * 458 mm³, Package size 485 × 480 × 528 mm³, Net weight 9.65kg, Gross weight 14.30 kg |
P1S：389 * 389 * 458 mm³, Package size 485 × 480 × 530 mm³, Net weight 12.95kg, Gross weight 17.60 kg P1S Combo：Package size 485 × 480 × 585 mm³, Gross weight (AMS included) 21.60 kg |
| Electrical Requirements | 100-240 VAC, 50/60 Hz, 1000 W @220 V, 350W@110V | |
The package also includes:
- Stainless Steel Hotend with Nozzle
- Build Plate
- Bambu PLA Filament(with a spool)
- Unclogging Pin Tool
- Power Cable
- Accessory Box
Didn't find what you were looking for? Have questions?
Our goal is to help you find the best solution. If you can't find the product you need, we will offer our favorites and recommendations, even if we don't have them in stock.
Your 3D printing expert – we offer practical assistance and long-term partnership.
© 3D Baltic. All Rights Reserved.
Website development and advertising -www.belownil.com